TS267 - New brush doesn't fit on wand
TS267 - New brush doesn't fit on wand
If your new brush will not fit on the wand it is because the adapter was inadvertently removed when the old brush was removed. Check the old brush for the missing adapter, and possibly the missing spray disc. Normally, to remove a brush, rotate it counter-clockwise 1/4 turn and then pull it off. If you continue rotating it past 1/4 turn it will unscrew the adapter. Then it makes it seem as though the next brush is too large for the end of the wand.
To reattach the adapter:
- Insert the spray disc into adapter, the ridge on the spray disc must face away from the adapter
- Screw the adapter with the spray disc onto the taper tube
- Attach the brush to the adapter
- Rotate the brush clockwise to tighten the adapter to the taper tube
