TS267 - the adapter has come off with the brush

TS267 - The adapter has come off with the brush

To remove a brush, rotate it counter-clockwise 1/4 turn and then pull it off. If you continue rotating it past 1/4 turn it will unscrew the adapter. Then it makes it seem as though the next brush is too large for the end of the wand. To reattach the adapter:

  • Insert the spray disc into adapter, the ridge on the spray disc must face away from the adapter
  • Screw the adapter with the spray disc onto the taper tube
  • Attach the brush to the adapter
  • Rotate the brush clockwise to tighten the adapter to the taper tube