M76 Imperial Four - Things To Know
Both sink/countertop and wall/ledgeback installation hardware are included with your faucet.
For sink/countertop installation, the M76 requires 2 holes (minimum 7/8” diameter) on 8” centers and fits all standard 3-hole and 4-hole sinks. For wall installation the M76 requires 1/2" MIP water pipes on 8” centers. The mounting hardware allows for both vertical and horizontal adjustment. Please refer to the specifications.
We strongly recommend that you have hot and cold shut-off valves located under the sink and we believe flexible supply lines are the most convenient way to connect your water supply for a sink/countertop installation.
Your Dishmaster is designed to use liquid detergents. Do not attempt to use soaps or soap powders. We recommend Dishmaster® Liquid Detergent Concentrate. Other name brand liquid detergents may work in your Dishmaster. Do not use detergents with lotion additives. Avoid detergents that appear opaque or cloudy rather than transparent.
Every faucet’s longevity is subject to the condition of the water that flows through it. A Dishmaster is no exception. Water quality causes the most variation in the performance of a Dishmaster Faucet and water conditions vary greatly throughout the country. In addition, the unique design of your Dishmaster that allows it to dispense suds at the touch of a button means it has more components than the typical faucet. We have no control over the condition of your water and therefore do not warranty seals or rubber components. However, with proper care, your Dishmaster will give you many years of reliable service. Please take a few minutes to read through the Operation and Maintenance sections and become familiar with the use and care of your Dishmaster.
We are continuously improving the design and material content of the parts used in our Dishmaster faucets. After development and testing, we incorporate these improvements into production. Any part improved in this manner is interchangeable with the part(s) it replaces. When new style parts are supplied on a parts order they are interchangeable with the old parts.