K2285 Mounting Extensions

M2000 Century Instructions

Water supply must be shut off. Pliers are not normally required for this installation. If you find that you must use pliers, take care to not over tighten the components.

Remove flange nuts from valve body and hose guide

  • Water connections may be pressed together to allow removal of flange nut.

Install Extension Rings

  • Gently squeeze a white extension ring into an oval shape.
  • Slip oval-shaped ring over water connections.
  • Squeeze ring back into a round shape.
  • Screw ring onto valve body until it stops against shoulder on inside of ring.
  • Screw second white extension ring onto hose guide until it stops against shoulder on inside of ring.

Install Extension Tubes

  • Gently squeeze a black extension tube into an oval shape.
  • Slip oval-shaped tube over water connections.
  • Squeeze tube back into a round shape.
  • Screw tube into extension ring until it stops against shoulder on the inside of ring.
  • Screw second black extension tube into extension ring on hose guide until it stops against shoulder on inside of ring.

Place faucet on sink/countertop per installation instructions

Install Spacers and Flange Nuts

  • If extension rings extend below the counter top, place one or more gray spacers over valve body and hose guide as needed to cover extension ring threads.
  • Screw flange nuts onto valve body and hose guide.

Refer to Owner’s Manual for completion of your faucet installation.

 

M76XL Imperial Four XL Instructions

Water supply must be shut off. Pliers are not normally required for this installation. If you find that you must use pliers, take care to not over tighten the components.

Remove flange nuts from hose guides

Install Extension Rings

  • Screw a white extension ring onto each hose guide until it stops against shoulder on inside of ring.

Install Extension Tubes

  • Screw a black extension tube into each extension ring until it stops against shoulder on inside of ring.

Place faucet on sink/countertop per installation instructions


Install Spacers and Flange Nuts

  • If extension rings extend below the counter top, place one or more gray spacers over valve body and hose guide as needed to cover extension ring threads.
  • Screw flange nuts onto hose guides.

Refer to Owner’s Manual for completion of your faucet installation.